So here's the thing I like to ride loose trucks but when you don't have lock nuts the nut will fly of after a while
So does anyone know how to fix this cause I really like loose trucks

Post below

Glue Them,

Or use washers.

Well I do have washers but the nut come loose anyway I could do as you say and glue them but I don't know how

Dip a tiny bit of glue on the end of an axel with a nut on, then wait for it to dry and you should be good!

pretty sure he's talking about kingpins, not wheels..

but yea, a tiny drop of superglue on the kingpin nut (a paperclip or something makes it easy to put on) once you've got your trucks to the right tightness, wait 24hrs for it to fully dry and cure, then ride away.

Thank's everybody really helped or Im gonna see tomorrow

So cool that you are using the TD longboard bushings! They give regular wides so close feel to TKY bushings it is crazy. Nice and loose, but spring back in place in no time. I tested it too just to see what was posible to go on a budget..

Just superglue the nuts in place on the kingpins as mentioned by other. Works a treat..

You can also tighten the nut one round in and gently put some superglue on the threads, then loosen the nut back into the position you want it. That way there is a little more glue on in the threads..

Thanks man but Im not using the TD longboard bushings anymore
Cause they break when you've had them on for a while
They're a very soft material and doesn't hold for regular fingerboarding
But they worked great for a while