Things you will need- 3 small pieces of veneer, wood glue, scissors, string (yoyo string works well), markers (optional)
Steps:
1. Take your 3 small pieces of veneer and cut them into a shape you like.
2. Glue your 3 pieces of veneer together and put them under a heavy object. Or if you want a shape, put them between 2 Tech Decks or in a mold. And wait for the glue to set.
3. Using scissors, cut off any extra pieces of veneer or sand them off.
4. Take a hole punch or drill bit and make a whole in either the nose or the tail of the board (it doesn't matter too much which one)
5. Take a piece of string and put it through the hole you made and tie a knot that is big enough so it won't slip through the hole. (a yoyo string is good for this because there is already a loop at the end, however, you can make a loop quite easily).
6. Add tape onto the deck for grip otherwize it will slip away easily.
7. Apply a graphic using marker pens, paint or paper and lacquer.
https://i.imgur.com/SbJLSZY.jpg8. Get a hairdryer or car and sesh!