Can somebody please help me? My brts have a part on one of the axles where the wheel goes that isn't smooth causing the bearing to not be able to fully go on. I am able to get the wheel on but I have to force it a bit and once its on its hard to get off. The problem is not the bearing as I've tried multiple. Here's a picture of the problem, this is as far as the bearing goes on easily. (took bearing out of wheel to show better)
" />
Any help is appreciated!  

Use a file an shave it down abit

Use a file an shave it down abit

fuck i dont know why this posted twice.
dont know how to delete it sorry guys.

Take your axle out, pinch it between sand paper and twist it so it gets nice and shiny but be careful not to sand on the threads.

Anybody know if the brr medium bushings are decent and can somebody compare them to a bushing of similair hardness?

Are oak wheels like a smaller sized then normal?

Nope. They are tall and skinny,

Anyone know the size of grip from Unique? Thanks....

Just pet oaks on my trucks and tightened the nuts, a little bit of the thread sticks out past the nut which is quite sharp to touch, if I loosen the nuts the oaks have a bit of wiggle room, any solutions?

Use a small file to make it not sharp^

movin-like-burnie wrote:

Use a small file to make it not sharp^

Just got a new file dude? haha Ko and I don't want to adjust them as they are one day old so could I like add in sone spacerts or something?

Jack B. wrote:

movin-like-burnie wrote:

Use a small file to make it not sharp^

Just got a new file dude?  haha Ko and I don't want to adjust them as they are one day old so could I like add in sone spacerts or something?  

use the oak washers.. and flip them around one side is slightly offset so the nut sits more inside the wheel..also if you don't have the washers that came with the oaks use some rubber pivot tuning stuff to make a tiny washer.. you will have to cut a very thin slice of it to use as the washer.

Trent Witcher wrote:

Jack B. wrote:

movin-like-burnie wrote:

Use a small file to make it not sharp^

Just got a new file dude?  haha Ko and I don't want to adjust them as they are one day old so could I like add in sone spacerts or something?  

use the oak washers.. and flip them around one side is slightly offset so the nut sits more inside the wheel..also if you don't have the washers that came with the oaks use some rubber pivot tuning stuff to make a tiny washer.. you will have to cut a very thin slice of it to use as the washer.

Thanks Trent so just use pivot cups as spacers ?

Jack B. wrote:

Trent Witcher wrote:

Jack B. wrote:

movin-like-burnie wrote:

Use a small file to make it not sharp^

Just got a new file dude?  haha Ko and I don't want to adjust them as they are one day old so could I like add in sone spacerts or something?  

use the oak washers.. and flip them around one side is slightly offset so the nut sits more inside the wheel..also if you don't have the washers that came with the oaks use some rubber pivot tuning stuff to make a tiny washer.. you will have to cut a very thin slice of it to use as the washer.

Thanks Trent so just use pivot cups as spacers ?

I do that man, works a treat.

Ian B wrote:

Jack B. wrote:

Trent Witcher wrote:

Jack B. wrote:

movin-like-burnie wrote:

Use a small file to make it not sharp^

Just got a new file dude?  haha Ko and I don't want to adjust them as they are one day old so could I like add in sone spacerts or something?  

use the oak washers.. and flip them around one side is slightly offset so the nut sits more inside the wheel..also if you don't have the washers that came with the oaks use some rubber pivot tuning stuff to make a tiny washer.. you will have to cut a very thin slice of it to use as the washer.

Thanks Trent so just use pivot cups as spacers ?

I do that man, works a treat.

Cheers guys

Do Ytrucks restock? The color I want just sold out :/

I am pretty sure they will,you should contact them.

They don't have a Ytrucks specific email. You think I should just use their normal one?

Yeah I am pretty sure they are 2 entities but 1 company.

Thats how flatface is atm, they dont have oaks rv bananna yellows, gunna contact them when i get ma cash

https://www.blackriver-shop.com/accessories/display/blackriver-ramps-berlinwood-3er-display.html

How does this display holds the decks?

It comes with stuff to put the deck onto the wood thing it says

GunnerBoser wrote:

It comes with stuff to put the deck onto the wood thing it says

HAHAHA Oh didn't saw that :') probably double sided tape

Is the riptape that comes with bw 33.3 slim and catchy or just regular?
I haven't used riptape in yeeears, always been an fbs guy. But whatever I got with my recent bw is the best shiz ever.

GrantHarris wrote:

Is the riptape that comes with bw 33.3 slim and catchy or just regular?
I haven't used riptape in yeeears, always been an fbs guy. But whatever I got with my recent bw is the best shiz ever.

I was wondering the same thing, i think it's a new version of Slim and Catchy cause it has the teal backing.