|
|
Author | Message |
---|
Pureskate FBHQ Regular
Posts : 452 Join date : 2012-12-25
| Subject: Mini ramp project Tue Mar 04, 2014 8:28 am | |
| So today I came across some bamboo wooden mats that I believe are used to place food on like on a dinner table or something. I honestly don't know what they are for, but I know what I'm going to use them for! I've been wanting to make a half pipe or mini ramp for a while now, but just never did it because i never found the right type of wood to use. Well after playing with these bamboo mats I've decided to make a mini out of them! Here is a sketch I've made on paper. The ramp will be 6ft in length and 2 feet in width. One of the sides will have a hip on it and the other will be flat or like a fun box. The ends will be like a quarter pipe or mini ramp and on one end I would like to have part of it higher than the other part for variety. So far I only bought one mat, but will go to the store and get another one tomorrow. I've already cut away the fabric surrounding the sides and I've given it a light sand. I plan on making a large rectangle frame for this to sit on and then cut out the shapes of the quarter pipes and hip so that all I have to do is lay this bamboo on top of it and glue it down. It's totally ride-able even now and the cracks do not interfere withe the fingerboarding, but I would like to get some wood filler and fill in all those cracks and then sand that down to have llike a perfectly smooth finish. I think I'm pretty serious about this project and spring break is next week. So I'm going to try and make a goal of getting this done before spring break is over. I also want to get a few of those chinese plants (trees) and put them in possibly grind-able beds to give the whole ramp an Asian theme. I also already have the metal coping for the rails on the mini ramps too. Check out the pics.
Last edited by Pureskate on Wed Mar 05, 2014 2:35 am; edited 1 time in total |
|
| |
BryanH FBHQ Regular
Posts : 540 Join date : 2013-11-16 Age : 25 Location : Australia :P Setup : Neztek Vulcan Custom
Brt's w/ Witchcrafts
G4's
Clean sheets
| Subject: Re: Mini ramp project Tue Mar 04, 2014 10:23 am | |
| Sick!! but i could see a problem regarding the bumps on the mat. :/ |
|
| |
B.Arbour FBHQ Beginner
Posts : 54 Join date : 2014-02-08 Age : 28 Location : BC, Canada Companies : Arson Decks Setup : Arson Deck
Y Trucks X4's
Witch Craft Bushings
FlatFace G6
Ace 3 tape
Arson deck
BRTs 2.0
Winkler Big Daddy Zs
TNP tape
| Subject: Re: Mini ramp project Tue Mar 04, 2014 12:49 pm | |
| That looks so big! And yeah I agree LazyFingers the bumps could get annoying |
|
| |
Toasty Blossoming FBHQer
Posts : 184 Join date : 2013-05-14 Age : 27 Location : Middle of Nowhere, North Carolina
| Subject: Re: Mini ramp project Tue Mar 04, 2014 2:59 pm | |
| Seems like the "bumps" would feel kinda like tiles, but yeah it'd probably be best to fill them. Also, with the trees, you mean those little bonsai trees? You might be able to get some fake miniature ones at a craft store if you want it to fit in a planter, but if you want a full sized one, that'll cost you anywhere from hundreds to thousands. Great idea though, and the design is sick. Will be watching this thread for sure! |
|
| |
streetsteeze1 Blossoming FBHQer
Posts : 182 Join date : 2013-10-28 Age : 24 Location : london Setup : Weca N.H.B graph
32mm silver brts
Ff black
Rachet rails (cable ties)
La vachina tape
| Subject: Re: Mini ramp project Tue Mar 04, 2014 5:23 pm | |
| i like the idea but I'm not sure bout the surface. keen to see where this project leads |
|
| |
WantSomeSlaw Trade Moderator
Posts : 2575 Join date : 2013-05-14 Age : 24 Location : Under your bed. Setup : What's a fingerboard?
| Subject: Re: Mini ramp project Tue Mar 04, 2014 8:53 pm | |
| I think the surface is what makes it awesome! |
|
| |
Zach Every Day FBHQer
Posts : 832 Join date : 2011-11-23 Age : 26 Location : UK Setup : Weca
Blackriver trucks
Flatface wheels
| Subject: Re: Mini ramp project Tue Mar 04, 2014 9:23 pm | |
| If it ends up anything like the drawing it will be so sick! The 'bumps' will be fine to ride on, i made a quarter out of strips of wood a while back |
|
| |
George Alexander FBHQ Regular
Posts : 678 Join date : 2012-05-02 Age : 109 Location : GRATATA Companies : GRATATA Setup : GRATATA
| Subject: Re: Mini ramp project Tue Mar 04, 2014 10:50 pm | |
| - Zach wrote:
- i made a quarter out of strips of wood a while back
And that's hella sick! |
|
| |
skatemaster231 Moderator
Posts : 1409 Join date : 2013-04-22 Age : 24 Location : internet Setup : D͐̏̋̐ͣ̐͊́͂̈́ͨ̏̋ͥ̆͑ͧ͘͜҉̺̙̹̞̗͚̤̻̫̼̳͖͔̩̤̘͇ǒ̱̰̳̟̟̞̜̖̬ͦ͌͂ͦ̎̅ͫ̑͂ͦͩ́̚̚͢ ̴̮͍̲̖̖̤̯͎͎͋̈́ͫ̂̊̇ͤ̆̓̌ͫ̐ͣͣ̆ͬ͌̚͡y̨̛̬̠̰̙̫̮̪̟͈̯̘͎̗̆ͪͫ̉ͭ̅ͫ͊ͩ́́̀o̶̶̘̝͇̜̝͓̞͉̰̫͚ͣ̽̄̀ͅu̷̡͙̜̳̠͈͕̹͗̊̏͑̿͌̓̇̽͂̄͋ͯ͂̍ͣ̂̓̀͘̕ ̣̳̭̝̻̣̤̫̣̠̦̙̦̲ͣ͂̃ͦ̑ͦ̃͂ͣ̓̇͒̈͘͠t̴̼̖̫̞͔̺͒̎ͯ͐͂͛̏̈ͦ̐ͧͭ̅͊̾ͣ͒́̚̚͘̕h̬̖̙͙̰͖̺͙̟͛̾̐̃ͦͪ̏ͧ͌̓͘̕į̶̻͖̠̟͔̟̦̝̜̞̄̇̏̂ͨ̋͂̕͟͝n̵ͨ͌͊̓̆̾͛̏ͬ̑̎̾ͭͮ̌ͫͩ̚҉̶̵̰̫̩̲͕̱̗͚͇̰ͅk͙̳̳͓̟̝̠̯̝͙̻͙̻̱̼͖̔ͧͤͩ̾̀͢͢͠ͅ ͥͫ͒ͧ̏ͯͮ̓ͬͯ̾̽̈̀ͥ́̀͘͠҉͈̩͍͔̲͖͔ț̶̛̛͎̜̜̰͙̰̝̝̦̪̜̅͌̋ͬ͌̄͜͞h̸̥͎̰̤̼̱̝̜̭̹͖̱̗̗̪̫̻͆̾̈̓̌ͮ̎̅̄̅͋̋̔̿̚̕i̡̩̬̰̹̩͓̩̣̱̗̹͑ͧ̾̿̂̚͟͡ͅs̐ͤͭ̐ͫ͋ͮ́҉̢͏̳̦̠͕̠͈̣͕̫͔̫͖͖̹̗̟͢ ̴̠͓̺̩̩̙̬̬͈̼̭̰͖̱̺̣̗̫̉͂ͪ̔̍̀ͫ̀̎̏̔ͯ̌̒̒ͩͧ́i̸͛͋̄̂͊͋͗͑͏͙̙͈̦͎̥̰̕s͂̍̑ͫ́̇͌̑̿̒ͦ̓̊͛̚̚̚҉̞̟̣̻̲̜̫̺͉̠̬̥̙̜̪̭́̕͞͡ ̧̖͔͕̹ͧ̐ͦ̎̊ͧ̽ͨͦ̒͐̀͞͡ͅą̛͈̞̪̖͓̣̫̰̠̤̖̠͉̪͔ͦͦ̅̐͐ͥ͂̓̋͒̔̄ͣͤ͂͂͆͊ͬ͟ ̡̛̱̦̗̫̯̻͓̭ͦ͒̐̒̆̇̉̀p̡ͤͮ͛ͫ͋̽̄̎̑͑̈̉̒͛̎͋̿ͮ̓͠͏͚̮̖͖̫̦͙͎̭̜͇̺̻̩̹̕r̴̵̡̟͖̫̝̘̜̝͇̙̦̝̪̞̍̆̃́ͦ̚͘͢o̷̧͔̪͙͓͔͓̞̘̺̟͇̳͎̦̩̣̻̩͓ͮ̅͊̉̽̄̍̋͐ͥ̓́͐̚͢b̡̥̞̳̙̠̞̘͉̼̤̘̝ͨͣ͌ͥͤ̍̓ͩ́̈́ͨ̅̓ͧ̅͢lͭ̿͂͛̄͐̈͗̑̓ͭ͆̉͋ͩ̿̋̇͡͡͞҉͔̼̻̣̝̜̭̖͕̙͈͓̖ͅeͣ̂ͭͤ͑̏ͬͨ̓҉̨̖̼̹͉̹͈͞ͅm̛͛ͦ̾̉̋́̊͐͐̂̐̎̄ͯͤ̚҉̡̻̳̤̥̪͎̹͔͉̝͍̫͖̺͓̬͙͜ͅ?̥̣̼͇̟̰̙͉̜̦̟̥̬̩͕̌̊̔ͬ̔̊ͩ̍̂̐̂͐̌̋ͩͩ͛́͡
| Subject: Re: Mini ramp project Tue Mar 04, 2014 11:10 pm | |
| My grandma has a bamboo mat that my bro and I use to sleep on when we have too. So fun to ride on but it's not so fun to sleep on. I have shaped it into a spine before and it's hella fun. |
|
| |
parrish FBHQ Regular
Posts : 496 Join date : 2013-11-15 Location : southern vermont. Setup : FBS
woob square kicks
BRT wides
green witchcrafts
oaks white+
| Subject: Re: Mini ramp project Tue Mar 04, 2014 11:54 pm | |
| Yeah dude that'd bee prime those little bumps will make it way sicker. |
|
| |
Pureskate FBHQ Regular
Posts : 452 Join date : 2012-12-25
| Subject: Re: Mini ramp project Wed Mar 05, 2014 4:02 am | |
| [update] Today I just picked up the other half of the bamboo mat. I've also taken off the yellow fabric that used to surround the edges and gave it a light sand. Here you can see a preview of what it should look like when completed. The roll over in the middle is actually from an aphlikshun roller over ramp underneath. There is also a picture of the coping which I'll be using too. I've also been looking a prices for fake bonsai pants and boy they are extremely expensive. This is my up and coming spring break project so stay tuned for updates in the future. Also the gaps in the wood do NOT affect fingerboard performance at all. I honestly thought that they were going to interfere, but its not annoying at all and actually feels pretty epic! I bought the bamboo mats for like $5.00 each at a thrift store. I'm also thinking that maybe a rainbow rail over the roll over in the middle might be the perfect addition. |
|
| |
GeraldineMilne FBHQ Regular
Posts : 425 Join date : 2013-06-16 Age : 29 Location : New York Companies : Teak x GrindSir
| Subject: Re: Mini ramp project Thu Mar 06, 2014 5:03 pm | |
| Looks great, can't wait to see pics of the finished ramp |
|
| |
Pureskate FBHQ Regular
Posts : 452 Join date : 2012-12-25
| Subject: Re: Mini ramp project Tue Mar 11, 2014 2:23 am | |
| Update. Today I wanted to make some good progress on my project so I got to work and started getting things done. I kind of changed things from the previous version I had in mind. Now the roll over is to be across the whole ramp since I want that rainbow rail over it and I decided to make one side have a bank and the other side be a quarter. To give it some variety I made the bank side have two different heights 4 and 6 inches and the quarter side have two heights as well with those being 6 and 8 inches. Before I make most ramps I like to get an idea of how high or what shape the ramps will be. Here is a pencil trace out of what the shape I want the quarter ramps to be. I accomplished this by curving the bamboo material until I got the desired shape for the quarters that I wanted and then I set a thin piece of particle board next to the bamboo curve and just traced that shape onto the particle board. This is what the frame of the park/ramp is like. It consists of some beams of 1x2's and a thin sheet of plywood. I haven't actually made the frame yet and that's because I don't know how big the frame needs to be because I haven't set down the bamboo strip yet. Once I set down the strip of bamboo then I'll know just how long my ramp needs to be. Here is the bamboo strip rolled up. Interesting how it takes up so little space. Here is my work area. You can see the templates that I've cut out of the thin particle board. I did this with just a simple jigsaw. Here I was testing out the curves on the quarter ramps. Surprisingly that all came out very well and I'm happy with them. I used the templates as guides for tracing out the shapes on the thicker pieces of wood then used a jigsaw to cut them out. They all came out pretty much identical which is a good thing. Also all of the wood used for this was just wood that I picked up for free from some dresser drawers that someone was throwing away. Here you can see the roller over and the wooden pieces which will make up the skeleton of it. I used 6 pieces, which might be a bit of an overkill, but if anything it will just make it more sturdy than before. I doubled up in the middle and put two pieces of wood there because when I put in the rainbow rail I want to make sure the rail actually gets fitted into the wood below. This is what it looks like with all the pieces on it minus the bamboo. It was pretty exhausting to do this, but I'm sure it will pay off. Hopefully I can do more in the next few days. Peace! |
|
| |
GeraldineMilne FBHQ Regular
Posts : 425 Join date : 2013-06-16 Age : 29 Location : New York Companies : Teak x GrindSir
| Subject: Re: Mini ramp project Tue Mar 11, 2014 2:27 am | |
| Wow, looks amazing!! |
|
| |
eddie Victory FBHQ Regular
Posts : 542 Join date : 2012-11-30 Age : 38
| Subject: Re: Mini ramp project Tue Mar 11, 2014 10:52 am | |
| this is a really interesting an cool project! great to see so many pictures an great detail in this thread nice work!! cant wait to see the finished product! |
|
| |
Pureskate FBHQ Regular
Posts : 452 Join date : 2012-12-25
| Subject: Re: Mini ramp project Wed Mar 12, 2014 1:16 am | |
| What I did today: Cut the long thin plywood board down to the right size to fit the bamboo width. Cut out the middle sections of each ramp so that each ramp will have extra support. Tacked together the small and large bank ramps together. Took off the cloth backing of the bamboo since I didn't feel as if I needed it. Interestingly I like to tack together my ramps with hot glue and then later use liquid nails to permanently seal them together. Since I like using particle board nails and screws just don't work too well for me. Cost so far: Thin piece of plywood and long 2X1's $20.00 already had the longer thin piece of plywood. Bamboo pieces $10.00 Metal coping round $3.00 |
|
| |
Jack B. Constant FBHQer
Posts : 1265 Join date : 2013-04-10 Age : 26 Location : Glasgow :) Setup : Berlinwood 33.3 Low
Winkler classics
TKY
BRT 2.0 Super Silver
FBS
| Subject: Re: Mini ramp project Wed Mar 12, 2014 7:28 pm | |
| looks amazing man might try it later |
|
| |
Pureskate FBHQ Regular
Posts : 452 Join date : 2012-12-25
| |
| |
Turnt Part of the Furniture
Posts : 3168 Join date : 2013-06-07 Age : 33 Location : comin out da fax machine
| Subject: Re: Mini ramp project Fri Mar 14, 2014 1:14 am | |
| |
|
| |
parrish FBHQ Regular
Posts : 496 Join date : 2013-11-15 Location : southern vermont. Setup : FBS
woob square kicks
BRT wides
green witchcrafts
oaks white+
| Subject: Re: Mini ramp project Fri Mar 14, 2014 1:24 am | |
| |
|
| |
urbanjump FBHQ Regular
Posts : 587 Join date : 2013-12-19 Age : 29 Setup : Berlinwood Xwide:
X4's, China wheels, stock tuning
Brutal Custom:
TDLB's, Duros, witchcrafts
Zink, Ktown, 2 Bawsewoods, 2 woobs, Beastpants, Cowply:
All have wide BRT's, Oaks or FF wheels, & Witchrafts
| Subject: Re: Mini ramp project Fri Mar 14, 2014 1:45 am | |
| |
|
| |
GeraldineMilne FBHQ Regular
Posts : 425 Join date : 2013-06-16 Age : 29 Location : New York Companies : Teak x GrindSir
| Subject: Re: Mini ramp project Fri Mar 14, 2014 1:56 am | |
| Wow, looks awesome! Can't wait to try it |
|
| |
Mallory FBHQ Regular
Posts : 645 Join date : 2013-01-17 Age : 28 Location : Tempe, AZ Companies : Unique Decks
| Subject: Re: Mini ramp project Fri Mar 14, 2014 3:26 am | |
| |
|
| |
Ken .I Part of the Furniture
Posts : 2868 Join date : 2012-04-13 Age : 26 Setup : Blosom 32mm
Brt wides
Substance Zeros
Ace tape
TKY's
| Subject: Re: Mini ramp project Fri Mar 14, 2014 4:36 am | |
| |
|
| |
Concept Blossoming FBHQer
Posts : 341 Join date : 2014-01-04 Age : 40 Setup : Weca Pineapple
TDLB
White Oak Mini's
White beta bushings
Creamy Goo
***
Brutal 'Bomb Shape'
Rasta Ytrucks
White Oaks
Red beta bushings
Creamy Goo
| Subject: Re: Mini ramp project Sat Mar 15, 2014 4:23 pm | |
| |
|
| |
Sponsored content
| Subject: Re: Mini ramp project | |
| |
|
| |
|