Could I have some advice on lacquering,
atm, I use clear coat, but it makes the decks smell funny,

any help? :L

I have heard tht clear coat is ok, i use lacquer.

Mainly just paint it or spray it on,
Make sure you wait roughly 2 hours between every coat
You should need 4-6 coats

Hang the board with thin material through the holes and spray it with 7 coats of lacquer and wait 2 hours betweens coats you should do it outside

The deck shouldn't smell that funny after the lacquer is dry. I usually use fine steel wool when I lacquer. I apply in thin coats and lightly sand each coat. Make sure you don't sand too much, you only want to remove the small bumps form the lacquer. Also i forgot to mention that before i lacquer, i sand the bottom ply with VERY light sand paper to make it super smooth.

It smells funny because you most likely aren't letting it dry all the way.

^^^^what he said and just be patient on it. I have messed more shit up wanting to use it right away when I should have waited.

2 hours in between each coat. 8 coats. meh